The post TigerStop – TigerSaw 1000 appeared first on Stiles Machinery.

The post TigerStop – TigerSaw 1000 Compact appeared first on Stiles Machinery.

Features

V-Notch in One Pass

The cutting angle of the notch is defined by the arrangement of the saw blades. First and end cut are done in one single working cycle.

Accurate Positioning

A sliding carriage (NC-Stop) pushes the workpiece exactly to the programmed position. The workpiece length detection determines the length of the infeed workpiece to a tenth. The machine control then carries out all the necessary calculations with optionally available software modules in order to achieve optimal utilization of the bars and a perfect production process.

The post Stegherr – V-Notching Machine KSS appeared first on Stiles Machinery.

The post TigerStop – TigerSaw 2000 appeared first on Stiles Machinery.

The post TigerSaw Miter XL appeared first on Stiles Machinery.

Features

Cutting Angle Adjustment

The saw unit can be adjusted pneumatically or servo controlled (available as an option) from -45 to +45 degrees. The cuts are absolutely accurate and tear-free.

For All Materials

The GLS can optimally process profiled bars of wood, aluminum, MDF or PVC.

Suited For More

The GLS is also excellently suited for cutting a large variety of parquet components.

The post Stegherr – Profile Machining Center GLS appeared first on Stiles Machinery.

The GLS-2 is the extremely efficient and top-performing CNC-controlled all-round machining center for cutting, punching, drilling, milling, and printing of profiled bars – semi- or fully-automated. The Machining Center for Profiled Stock GLS-2 can produce high-quality glazing beads, door profiles, rain protection rails, etc. of wood, aluminum, MDF or PVC efficiently in series production. Flexible expansion levels allow for a perfect automation upgrade to fully automatic operation.

Adjustment of the cutting angle in two planes

The saw unit is tiltable, pneumatically or servo-controlled (optional), and can cut at any angle between +45 and -45 degrees in two planes.

The post Stegherr – Profile Machining Center GLS-2 appeared first on Stiles Machinery.

The post Stegherr – Notching Machine NF appeared first on Stiles Machinery.

With more than 40 years of experience and more than 300 running lines worldwide, System TM is a leading global supplier of customized solutions to the solid wood industry. System TM offers customized system solutions using the latest technology and high levels of machine-to-machine integration. They’re designed with minimum need for human intervention and high levels of self-regulation to uphold maximum manufacturing efficiency, uptime and use of wood resources.

Opti-Solutions are characterized by:

• System TM’s optimizing software – the only software available optimizing on both wood resources and the overall line capacity.
• System TM’s individual design. The lines are individually designed and manufactured, always considering the customer’s production and main machines. This ensures our customers high-performance materials handling, and 100% workpiece control throughout the line.
• Low labor costs and optimal utilization of the wood, ensure our customers to stay competitive in the global market.
• Higher efficiency for all main machines.
• Automatic production changeover from one central computer.

Door Manufacturing

Building Component Manufacturing

This Opti-Solution is a material handling system that consists of four feeding systems, model Opti-Feed 6000, feeding four different qualities to two high frequency laminating presses.

After laminating, the beams are separated in a buffer system and automatically transported to two grading and repair stations. If needed, the beams are repaired manually by two operators. After the grading and repair stations the beams are transported through a multi head cross-cut saw, model MK2 where the ends are trimmed before moulding.

After the moulder the beams are once again quality checked and repaired if needed, then labelled and transported to the automated stacking machine, model Opti-Stack 6000.

Flooring Manufacturing

This Opti-Solution is an optimizing cross-cut line consisting of an Opti-Feed 6000 feeding system, that feeds batches of workpieces to a planer. After the planer, the workpieces are automatically transported to a Microtec 502 scanner including x-ray, for detection of defects and quality.

Through a queue control system, the workpieces are then transported to three optimizing cross-cut saws model Opti-Kap 5003, that cuts the workpieces into flooring components. The cross-cut components are then sorted according to the correct lengths, qualities and widths.

Moulding & Millwork Manufacturing

This Opti-Solution is a material handling system consisting of an automatic infeed system model Opti-Feed 6000, that automatically feeds the workpieces to a bandsaw. The bandsaw splits the workpieces into two or three pieces, and the workpieces are subsequently singulated and orientated in the correct order before entering a moulder.

After the moulding process, the workpieces are transported to a double-end tenoner for end profiling, and afterwards automatically bundled in a bundling station. The bundled workpieces are immediately strapped or folioed, and then stacked into big packs by an automatic stacking machine model Opti-Stack 6000. After stacking the full pack is then folioed and strapped

Pallet Manuacturing

This Opti-Solution is a multi head cross-cut line consisting of an automatic infeed system model Opti-Feed 6000, that automatically feeds the workpieces to a feeding chain conveyor.

The feeding chain conveyor creates layers of the workpieces and feed the layers into a multi head cross-cut saw model MK5, for multiple cross-cutting. The cross-cut workpieces are then transported to a continuous stacking machine model Opti-Stack 6000, also capable of placing stabilizing sticks in the packs if needed. After stacking, the packs are automatically separated and transported to a strapping area.

Furniture Manufacturing

This Opti-Solution is an optimizing cross-cut line consisting of an automatic infeed system model Opti-Feed 6000. The infeed system feeds the raw material to a moulding machine, that splits the workpieces into lamellas. After the moulder, the lamellas are automatically singulated and transported to a Microtec Goldeneye 501 scanner, for detection of defects and quality.

Through a queue control system, the workpieces are then transported to two optimizing cross-cut saws model Opti-Kap 5003, that cuts the workpieces into furniture components.

After cross-cutting, the components are sorted for either finger joint components or fixed lengths, stacked manually or automatically by four stacking machines model Opti-Stack 3000.

The post System TM Opti-Solutions appeared first on Stiles Machinery.