SYSTEM ADVANTAGES

• highest transfer rate of all coating technologies, nearly no lost material
• ideal coating technology for flat parts
• pigmented and clear coating materials available
• flexible configuration of coating lines due to modular design. Line can be expanded according to needed output
• combination with spray application possible
• all components for a coating line from one single source. Cleaning, pre-treatment, application, drying, curing, material handling

ROLLER COATER

• coating process with zero vibrations due to rigid machine frame, perfect application for highest quality levels
• scraper units to be taken out of the machine completely. Smoothing roller in filler machine moveable. Scrapers pressed on pneumatically, scraper oscillation motorized
• easy access for adjustments and maintenance

The post Venjakob VEN COAT ROLLER COATER appeared first on Stiles Machinery.

With its VEN SPRAY PERFECT Venjakob has the innovative answer to all requirements encountered on the market.

Based on decades of know-how in the realization of high-performance spray painting plants, it is the flexibility of this new generation that convinces.

The following is a summary of plant advantages and features:

• Investment reliability thanks to modularity
• Paint compatibility
• Systematic paint recovery
• Low production idle runs
• Short paint change times
• Perfect painting result

Resource saving, economical and ecological
In the long term, the modular system takes into account all production requirements. At the time of machine purchase, its concept realizes all variants, from one off batch size through to large series production in the high-end range.

The modular concept permits implementation of changing framework conditions at any point in time by retrofitting new modules, thereby making your investment future-proof.

Energy expertise
The sophisticated spray gun control minimizes the rate of overspray.
With the patented V-belt design up to 98 % of the liquid overspray can be reclaimed. The paint retrieved in this way is recycled into the paint process. Over and above, the innovative ventilation system improves the ecological energy balance.

Economic and Ecological
The short setup times, long service life of the filter elements, fast changing times for spray systems and automated paint-change procedures offer a very high degree of efficiency.

The twin cleaning units allow the use of solvent-based paints as primer and the direct switchover in split seconds to the second cleaner operating with water-based paints.

Maintenance and cleaning operations take place completely separate from the production process.

The post Venjakob VEN SPRAY PERFECT appeared first on Stiles Machinery.

The suction and separation tower, made of stainless steel, is equipped with a series of filters and labyrinths to completely recover the paint particles dragged by the air in movement.
Painting: extruding head realized in steel plate. Components easily removable for a rapid cleaning

• Extremely efficient
• Full recovery of the excess of paint
• Completely made of stainless steel
• Paint heating system
• Available head configurations for painting of profiles on 3 and 4 sides

The post Vacuum Coating – STORM appeared first on Stiles Machinery.

The post Makor Profile Series – Shaping – SAG 80 appeared first on Stiles Machinery.

• Specifically suitable to work short parts, minimum 230 mm.
• Transport system with vacuumed belt, 200 and 120 mm wide
• Low operational costs
• Extremely sturdy, steel guides and ball pads
• High production speed
• Wide range of sanding units

The post Makor Sanding – LPC appeared first on Stiles Machinery.

No junctions. Rectified rubber thread. Electrical controls distributed along the length of the machine. Emergency system with manual switch-on of transmission (forward and backward). Control panel with Liquid Crystal display.

• Belt transport system 150 mm
• Extremely robust, steel guides and ball recirculating screws
• High production speed
• Wide range of operator groups, both milling and sanding

The post Makor Sanding – LP appeared first on Stiles Machinery.

• Belt transport ideal to feed and combine operating machines in working lines
• It helps panel loading and off-loading phases
• Speed adjustable by inverter
• Available in various versions based on the line requirements
• Wide range of sizes, from 1 to 6 meters

The post Makor Belt Conveyor – ROLLY appeared first on Stiles Machinery.

Two radiating upper units (lamps) and one lower. Each lamp has a long radiation duration constant in time. Total control system. Advancement by means of a transport system with steel bars. Resistant to high temperatures.

• Modular system, from 1 up 3 lamps
• Lamps with electronic power supply units, high power savings stand-by at 15%
• Roller transport system. Optional: belt

The post Makor Drying System – ULTRA DRY appeared first on Stiles Machinery.

As an example of MULTILEVEL’s space-saving application, the 23 ft. trays provide the equivalent of 138 ft. of laminar oven length in a space of 28-1/2 ft., saving 110 ft. of floor space.

• Availabe version 5500 e 7000 mm
• Compact Drying and storing solution
• Fast change of level, due to the handling system through ball recirculation screws

The post Makor Drying System – MULTILEVEL appeared first on Stiles Machinery.