Notching Machine - Stiles Machinery https://stilesmachinery.com/product_type/notching-machine/ Machinery Solutions for Leading Manufacturers Wed, 19 Jun 2024 18:35:57 +0000 en-US hourly 1 https://wordpress.org/?v=6.8 Stegherr – V-Notching Machine KSS https://stilesmachinery.com/series/v-notching-machine-kss-2/ Fri, 12 Jan 2024 17:19:19 +0000 https://stilesmachinery.com/series/v-notching-machine-kss-2/ Program-controlled V-Notching Saw for the accurate and high-performance cutting of wood, aluminum, MDF or PVC– with a fix angle V-cut, in ONE single working cycle. The KSS can produce glazing beads, door profiles, rain protection rails, picture frames, etc. Features V-Notch in One Pass The cutting angle of the notch is defined by the arrangement…

The post Stegherr – V-Notching Machine KSS appeared first on Stiles Machinery.

]]> Program-controlled V-Notching Saw for the accurate and high-performance cutting of wood, aluminum, MDF or PVC– with a fix angle V-cut, in ONE single working cycle. The KSS can produce glazing beads, door profiles, rain protection rails, picture frames, etc.

Features

V-Notch in One Pass

The cutting angle of the notch is defined by the arrangement of the saw blades. First and end cut are done in one single working cycle.

Accurate Positioning

A sliding carriage (NC-Stop) pushes the workpiece exactly to the programmed position. The workpiece length detection determines the length of the infeed workpiece to a tenth. The machine control then carries out all the necessary calculations with optionally available software modules in order to achieve optimal utilization of the bars and a perfect production process.

The post Stegherr – V-Notching Machine KSS appeared first on Stiles Machinery.

]]> Stegherr – Stretcher Bar Milling Machine BRF https://stilesmachinery.com/series/stretcher-bar-milling-machine-brf-2/ Fri, 12 Jan 2024 17:19:17 +0000 https://stilesmachinery.com/series/stretcher-bar-milling-machine-brf-2/ The Special Milling Machine BRF is used for the end processing of canvas stretcher bars. The machine can be manufactured in a fully automatic version with infeed magazine or in a simpler execution for manual feeding. In one single working cycle the workpiece is clamped and milled on the left and right side (tongue and…

The post Stegherr – Stretcher Bar Milling Machine BRF appeared first on Stiles Machinery.

]]> The Special Milling Machine BRF is used for the end processing of canvas stretcher bars. The machine can be manufactured in a fully automatic version with infeed magazine or in a simpler execution for manual feeding. In one single working cycle the workpiece is clamped and milled on the left and right side (tongue and groove). After milling the piece is released and can be removed for inserting the next workpiece. The machine is equipped with a workpiece recognition sensor which prevents the machine from starting when no workpiece is inserted. The BRF can be easily readjusted to milling different notching depths by using easily replaceable workpiece stops. If provided with a workpiece feeder the machine can work fully automatically. The workpiece magazine is suited for practically any type of profile. With an ejector mechanism the finished workpieces are returned to the machine operator. The Stretcher Bar Milling Machine is also available in a Single-End Execution. This machine can mill two profiles (min. length 180 mm) placed on top of each other at the same time.

Features

Single Working Cycle

In one single working cycle the workpiece is clamped and milled on the left and right side (tongue and groove). After milling the piece is released and can be removed for inserting the next workpiece. The machine is equipped with a workpiece recognition sensor which prevents the machine from starting when no workpiece is inserted. The BRF can be easily readjusted to milling different notching depths by using easily replaceable workpiece stops.

Fully Automatic Processing

If provided with a workpiece feeder the machine can work fully automatically. The workpiece magazine is suited for practically any type of profile. With an ejector mechanism the finished workpieces are returned to the machine operator.

Single-End Execution

The Stretcher Bar Milling Machine is also available in a Single-End Execution. This machine can mill at the same time two profiles (min. length 180 mm) placed one on top of the other.

The post Stegherr – Stretcher Bar Milling Machine BRF appeared first on Stiles Machinery.

]]> Stegherr – Notching Machine NF https://stilesmachinery.com/series/stegherr-notching-machine-nf/ Fri, 12 Jan 2024 17:19:14 +0000 https://stilesmachinery.com/series/notching-machine-nf-2/ The NF is a special milling machine for the processing of components up to 400 mm overall width. Typical areas of application for our groove milling machines are the manufacture of wooden outdoor products as well as window and furniture manufacturing. The machine can be equipped with either one milling unit (bottom) or with two…

The post Stegherr – Notching Machine NF appeared first on Stiles Machinery.

]]> The NF is a special milling machine for the processing of components up to 400 mm overall width. Typical areas of application for our groove milling machines are the manufacture of wooden outdoor products as well as window and furniture manufacturing. The machine can be equipped with either one milling unit (bottom) or with two milling units (top and bottom). The powerful milling motors contribute to the overall sturdy execution of this machine, suited for manufacturing various types of grilles and frames. The pieces can be cut and milled accurately from above and from below, with program controlled positioning and automatic infeed. Also available with a tiltable milling unit cutting upwards from under the machine table.

The post Stegherr – Notching Machine NF appeared first on Stiles Machinery.

]]>