The Kuper FSH Veneer Saw is your ultimate solution for tear-free, precise parallel cutting for all veneer thicknesses. Engineered for excellence, this machine delivers uncompromising accuracy, making it the top choice for parallel veneer cutting. Its ability to cut a wide range of veneer thicknesses effortlessly makes it an invaluable tool for any veneer processing setup. Experience precision that knows no compromise with the KUPER FSH Veneer Saw—your first choice for unparalleled veneer cutting performance.

Features:

• Unmatched Precision: The saw carriage is guided by a highly accurate linear guide, ensuring flawless cuts every time.
• Optional Planing Unit: Enhance your cutting quality with the planing unit, which is seamlessly integrated and can be activated via a selector switch. The unit executes up-cut milling during the retraction movement for superior finishing.
• Pneumatic Pressure Bar: Secure even the waviest veneer packages with the pneumatically held pressure bar on both sides, allowing for exact positioning.
• Advanced Measuring System: The optional parallel fence comes equipped with a state-of-the-art magnetic measuring system.
• Improved Processing Height: Featuring a new 200 mm diameter saw blade and protective cover with parallelogram suspension, the KUPER FSH allows for enhanced maximum processing height.
• Rear Parallel Fence: Achieve precise positioning with the rear parallel fence, guided linearly and lockable pneumatically.

The post Kuper FSH Veneer Saw appeared first on Stiles Machinery.

Large format fully automatic edge polishing machine with CNC-control and tilting milling-/polishing-unit for the finish-processing of sawn or pre-milled surfaces. The machine is suitable for transparent, technical or decorative plastic materials (e.g. PMMA, PC, PETG) or for the processing of mixed materials (PMMA with paper or aluminum).

The necessary process parameters can easily be retrieved with the material library based on the chosen processed material and the desired surface finish. Also, a tool recommendation and the corresponding collocation are displayed.

Due to the high precision of the polishing table, streaking can already be reduced while processing. Additional attachment points for lateral stops or custom devices facilitate the flexible adaption to every product.

Features

CNC Control with Material Library

• User friendly and clear CNC-control with touchscreen-interface. To simplify the selection of the process parameters, a material library with recommendations for cutting values and appropriate tools is already stored. The library is based on a large database with information about tool properties, types of materials and finish-options.

Machine Core and Front Reference Bar

• The core of the machine is made of UHPC (technical concrete), which gives the machine extreme rigidity and absorbs vibrations up to 95%. The front reference bar has anchor points that keep it stably in place. If necessary, these points can be readjusted to ensure a constant depth of cut.

Milling/Polishing-Unit

• CNC-controlled milling/polishing-unit with automatic adjustment of tilting value, milling depth, milling feed and clamping bridge. The tilting range of the unit can be adjusted from 0° to +63° depending on the respective machining. The interaction between the polishing unit and the multifunctional table also enables an anti-streak system without additional tools. Hence additional post-processing is not necessary.

Work Area

• The work area is illuminated and saved by a transparent safety curtain. The workpiece is safely positioned on the worktable during the machining due to the clamping bridge with an anti-rotation lock. A vacuum clamping zone provides additional support for higher machining angles and thin materials. The material chips are collected and discharged through the cover with integrated suction.

Multifunction Table

• The worktable is equipped with attachment points that can be used for additional lateral stops or custom devices. An open design on the left-hand side of the machine also allows the processing of extra-long workpieces by rotation.

Tools

• The machine is delivered with a basic tool body for 4 quick-change blades type Euracryl ES on the milling/polishing-unit. These can be used to produce (high-)glossy, sanitized or ready-to-glue surfaces on PMMA, PC, PETG, SAN and many more materials. It is also possible to process modern mixed materials such as PMMA with paper or aluminum.

The post Kuper – Euracryl ABP310 appeared first on Stiles Machinery.

The post Kuper QFS Series Cross Clipper appeared first on Stiles Machinery.

The post Kuper ZFS Series Double-Knife Veneer Cutter appeared first on Stiles Machinery.

The post Kuper EFS Series Guillotines appeared first on Stiles Machinery.

Standard Features
Solid sectional steel construction
Upper and lower belt-driven transport
Opto-electronically controlled function of the top pressure belt
Pneumatically controlled vertical moving of the top pressure belt
Top pressure belt guide with 4-sided linear ball bearings

The post Kuper FFM Series – Veneer Fanning appeared first on Stiles Machinery.

Standard Features

• Clearly arranged control panel with PLC screen
• Transport conveyor with galvanized steel rollers
• Transport roller conveyor with galvanized steel rollers
• Easy dismounting of transport rollers for cleaning
• Higher alignment feed (+300%)
• Higher pot-life of the glue due to reduced rotation speed of the glue rollers in stand-by
• 100% tight pressing of the bundle (no intrusion of glue into the bundle)
• Left-hand fixed roller fence
• Right-hand moveable roller fence on guided linear ball bearings
• Teflon-coated glue pots for easy cleaning
• Cooling unit for the glue pots

The post Kuper KLM 470 – Glue Application System appeared first on Stiles Machinery.

Kuper makes a veneer processing machine for every application, from veneer clipping and veneer splicing to veneer trimming, and is the only manufacturer to offer a full range of advanced veneer jointing technologies.

Kuper Zig-Zag veneer splicing machines use the globally patented Kuper Zig-Zag gluethread system. Developed in Kuper labs, these gluethreads are manufactured in modern production plants. Coated glass fiber, polyamide and polyester threads… there’s a suitable thread for your specific application.

Kuper longitudinal and crossfeed splicing machines give you production options for your process and both assure splices that are almost invisible.

Stiles represents the entire Kuper line, allowing you to set up and operate a complete Kuper veneer process in your shop, from initial clipping to gluing & fanning, to stacking and shrink-film wrapping.

The post Kuper CRC Series CrossRunner Crossfeed Splicer appeared first on Stiles Machinery.

The individual processing steps are optimally coordinated. The infeed of the pre-glued veneers is done by transport belts. During the transport of the veneer to the splicing zone it will be measured and aligned. Depending on the strip width, the integrated first strip pull-in facility switches on automatically. This allows fast processing of narrow and wavy veneers. The linear moveable top pressure unit can be manually positioned and is easily accessible for maintenance purposes. The installed cross cutting knife cuts the veneer sheet to the set fixed dimension. The cut strips are then automatically and precisely stacked in the stacker. All production parameters are listed in the clearly laid out touch screen and are immediately available.

The ACR is compatible with the end-splicing and trimming unit KUPER EVB and can be extended with an automatic feeding unit. Various stacker systems with working depths of 1400, 2100, 2500 or 2850 mm are available. The control panel with uniform and easy-to-recognize symbols facilitates selection and control via the screen with touch function. This allows direct selection of the most important functions.

The post Kuper ACR Series Crossfeed Veneer Splicer appeared first on Stiles Machinery.