Features

V-Notch in One Pass

The cutting angle of the notch is defined by the arrangement of the saw blades. First and end cut are done in one single working cycle.

Accurate Positioning

A sliding carriage (NC-Stop) pushes the workpiece exactly to the programmed position. The workpiece length detection determines the length of the infeed workpiece to a tenth. The machine control then carries out all the necessary calculations with optionally available software modules in order to achieve optimal utilization of the bars and a perfect production process.

The post Stegherr – V-Notching Machine KSS appeared first on Stiles Machinery.

High-speed milling spindles, rotating in opposite directions.

The main feature of this machine are the two high-speed milling spindles, rotating in opposite directions. The result is a perfect, tear free coping. For cut-to-length production, an optional cross cut saw mounted to a fence can be added. Even already profiled bars can be coped quickly, accurately and tear free with the KF-mini machine.

The post Stegherr – KF-Mini appeared first on Stiles Machinery.

Features

Single Working Cycle

In one single working cycle the workpiece is clamped and milled on the left and right side (tongue and groove). After milling the piece is released and can be removed for inserting the next workpiece. The machine is equipped with a workpiece recognition sensor which prevents the machine from starting when no workpiece is inserted. The BRF can be easily readjusted to milling different notching depths by using easily replaceable workpiece stops.

Fully Automatic Processing

If provided with a workpiece feeder the machine can work fully automatically. The workpiece magazine is suited for practically any type of profile. With an ejector mechanism the finished workpieces are returned to the machine operator.

Single-End Execution

The Stretcher Bar Milling Machine is also available in a Single-End Execution. This machine can mill at the same time two profiles (min. length 180 mm) placed one on top of the other.

The post Stegherr – Stretcher Bar Milling Machine BRF appeared first on Stiles Machinery.

Features

Cutting Angle Adjustment

The saw unit can be adjusted pneumatically or servo controlled (available as an option) from -45 to +45 degrees. The cuts are absolutely accurate and tear-free.

For All Materials

The GLS can optimally process profiled bars of wood, aluminum, MDF or PVC.

Suited For More

The GLS is also excellently suited for cutting a large variety of parquet components.

The post Stegherr – Profile Machining Center GLS appeared first on Stiles Machinery.

The GLS-2 is the extremely efficient and top-performing CNC-controlled all-round machining center for cutting, punching, drilling, milling, and printing of profiled bars – semi- or fully-automated. The Machining Center for Profiled Stock GLS-2 can produce high-quality glazing beads, door profiles, rain protection rails, etc. of wood, aluminum, MDF or PVC efficiently in series production. Flexible expansion levels allow for a perfect automation upgrade to fully automatic operation.

Adjustment of the cutting angle in two planes

The saw unit is tiltable, pneumatically or servo-controlled (optional), and can cut at any angle between +45 and -45 degrees in two planes.

The post Stegherr – Profile Machining Center GLS-2 appeared first on Stiles Machinery.

The post Stegherr – Notching Machine NF appeared first on Stiles Machinery.

This operating method ensures that even profiled bars are milled absolutely tear-free on the view side of the joint. Very easy programming over a touch screen with graphical user interface. The operation is user-oriented and intuitive with clear icons. The machine operator can store up to 500 individual programs.

Features

Fully Automated Processes

The millings for the cross joint are done fully automatically by two pairs of milling units working in opposite directions. This operating method ensures that even profiled bars are milled absolutely tear free on the view side of the joint.

Intuitive Interface

Very easy programming over a touch screen with graphical user interface. The operation is user-oriented and intuitive with clear icons. The machine operator can store up to 500 individual programs.

Suitable Materials

The cross joint milling machine KSF-2A can handle profiles of wood, aluminum, PVC or MDF. Service in Stegherr always includes the accurate adjustment of the machine to the customer’s profiles.

The post Stegherr – Cross Joint Milling Machine KSF-2A appeared first on Stiles Machinery.

Features

Perfect Joint

The V-cuts for the cross joints are performed by the top and bottom cutter heads, the 90° cuts by the back and front cutter heads. All cuts are done in one clamping. This creates the perfect joint and quality results.

Automatic Height Adjustment

The milling unit can adjust automatically to the varying widths of your profiles.

Tear-Free Coping

Coping of the profiled bars is done by means of two high-speed counterrotating spindles. The result is a perfect, absolutely tear-free coping profile.

Vertical & Horizontal Saw Cut

The integrated saw unit can also cut off frame profiles and glazing beads. Depending on the application required, the cutting angle is adjustable horizontally and/or vertically.

The post Stegherr – Cross Joint Milling Machine KSF-2E appeared first on Stiles Machinery.

The post Stegherr – Cross Joint Milling Machine KSF-Mini appeared first on Stiles Machinery.