The SLC Return Conveyor’s low cost and smaller footprint make it the perfect choice of small to medium size cabinet makers. Available in right or left-hand return configuration and specially designed to be used with smaller edgebanders. 

The post Doucet – SLC Return Conveyor appeared first on Stiles Machinery.

Specially designed to handle the fast pace of end-to-end spacing on Moulders, MR Return Conveyors enable you to run your moulder with just one operator.

The post Doucet – MR Return for Moulders appeared first on Stiles Machinery.

The Lateral Chain Feeder Model MFE-150 is designed for continuous feed up to 300 feet per minute of fixed or random length pieces into a moulder. On the feed table, boards are automatically placed along the feed line by perpendicular strands of chains.  A pneumatic system lowers chain carriage between each feed cycle, thus preventing unnecessary friction between the piece being fed and the reserve material.  Boards are automatically driven in sequence by a combination of two powered wheels located under the material and two top pressurized wheels.

The post Doucet – MFE Moulder Feeder appeared first on Stiles Machinery.

Feedback Return Conveyors are designed to handle the fast pace of end-to-end feeding on Shapers/Sanders and Edge Foilers. Suitable for all models and feed rates. Doucet Feedback Return Conveyors will give you the leading edge in today’s competitive environment.

The post Doucet – Feedback for Shapers-Sanders appeared first on Stiles Machinery.

The post Doucet – MANYX Stacker/Destacker appeared first on Stiles Machinery.

The post Doucet – BTWB3 Wide Belt Sander Return Conveyor appeared first on Stiles Machinery.

The Panel Sequencer Model ESB increases the productivity of Edgebanders, Shapers-Sanders, Tenoners, etc. right from the start. The ESB allows the operator to stage several panels in its bottom feed magazine. Panels are released automatically as soon as the preceding one clears the “no feed zone” on your Edgebander, or fed end-to-end on your Shaper-Sander.

The post Doucet – ESB Edgebander Feeder appeared first on Stiles Machinery.

The RETYX, an articulated arm with a vacuum grip, automates the handling of the panels at the infeed and outfeed of your edgebander. With similar features to a typical return conveyor, it has the advantage of presenting the parts in the right orientation for the next pass, allowing automatic stacking and unstacking in the areas provided for this purpose.

A 3-axis vacuum grip manipulator paired with receiving and return conveyors to handle the panels with care while maintaining a high cycle rate. The manipulator by its translation in vertical and horizontal moves the panels from the reception to the return zone or the stacking zone. It is also possible to use a zone to unstack the incoming panels in the production cell according to the operating mode.  In addition to all these movement actions from one area to another, there is an axis of rotation to orient the panels for their next passage through the edgebander.  Before feeding, the operator chooses the type of production and selects the number of passes of the panel to be fed. Depending on the pattern of production, RETYX performs the operation planned at this stage in the sequence.

The post Doucet – RETYX Return Conveyor appeared first on Stiles Machinery.

A 3-axis vacuum grip manipulator is paired to handle the panels with care while maintaining a high cycle rate. By its translation vertical and horizontal, the manipulator unstacks the material from the pallet or the stacking zone.

In addition to all these movement actions from one area to another, there is an axis of rotation to orient the material for its next passage through the moulder or sander.

Before feeding, the operator chooses the type of production. Depending on the pattern of production, GANTRYX performs the operation planned at this stage in the sequence.

• Vacuum grip manipulator
• 40” vertical and 120” horizontal translation or stroke or movement
• Rotation from minus 90 to plus 180 degrees

The post Doucet – GANTRYX Stacker/Destacker appeared first on Stiles Machinery.