INLINE:

• Each rake has its own pneumatic cylinder

• Able to handle different part thicknesses in one charge

IN CROSS TRANSFER:

• Due to sideways infeed / outfeed faster than in-line turner
• Saves space compared to in-line turner

The post Venjakob VEN MOVE BARREL TURNER appeared first on Stiles Machinery.

The SLC Return Conveyor’s low cost and smaller footprint make it the perfect choice of small to medium size cabinet makers. Available in right or left-hand return configuration and specially designed to be used with smaller edgebanders. 

The post Doucet – SLC Return Conveyor appeared first on Stiles Machinery.

Specially designed to handle the fast pace of end-to-end spacing on Moulders, MR Return Conveyors enable you to run your moulder with just one operator.

The post Doucet – MR Return for Moulders appeared first on Stiles Machinery.

The Lateral Chain Feeder Model MFE-150 is designed for continuous feed up to 300 feet per minute of fixed or random length pieces into a moulder. On the feed table, boards are automatically placed along the feed line by perpendicular strands of chains.  A pneumatic system lowers chain carriage between each feed cycle, thus preventing unnecessary friction between the piece being fed and the reserve material.  Boards are automatically driven in sequence by a combination of two powered wheels located under the material and two top pressurized wheels.

The post Doucet – MFE Moulder Feeder appeared first on Stiles Machinery.

Feedback Return Conveyors are designed to handle the fast pace of end-to-end feeding on Shapers/Sanders and Edge Foilers. Suitable for all models and feed rates. Doucet Feedback Return Conveyors will give you the leading edge in today’s competitive environment.

The post Doucet – Feedback for Shapers-Sanders appeared first on Stiles Machinery.

The post Doucet – MANYX Stacker/Destacker appeared first on Stiles Machinery.

The post Doucet – BTWB3 Wide Belt Sander Return Conveyor appeared first on Stiles Machinery.

The Panel Sequencer Model ESB increases the productivity of Edgebanders, Shapers-Sanders, Tenoners, etc. right from the start. The ESB allows the operator to stage several panels in its bottom feed magazine. Panels are released automatically as soon as the preceding one clears the “no feed zone” on your Edgebander, or fed end-to-end on your Shaper-Sander.

The post Doucet – ESB Edgebander Feeder appeared first on Stiles Machinery.

With more than 40 years of experience and more than 300 running lines worldwide, System TM is a leading global supplier of customized solutions to the solid wood industry. System TM offers customized system solutions using the latest technology and high levels of machine-to-machine integration. They’re designed with minimum need for human intervention and high levels of self-regulation to uphold maximum manufacturing efficiency, uptime and use of wood resources.

Opti-Solutions are characterized by:

• System TM’s optimizing software – the only software available optimizing on both wood resources and the overall line capacity.
• System TM’s individual design. The lines are individually designed and manufactured, always considering the customer’s production and main machines. This ensures our customers high-performance materials handling, and 100% workpiece control throughout the line.
• Low labor costs and optimal utilization of the wood, ensure our customers to stay competitive in the global market.
• Higher efficiency for all main machines.
• Automatic production changeover from one central computer.

Door Manufacturing

Building Component Manufacturing

This Opti-Solution is a material handling system that consists of four feeding systems, model Opti-Feed 6000, feeding four different qualities to two high frequency laminating presses.

After laminating, the beams are separated in a buffer system and automatically transported to two grading and repair stations. If needed, the beams are repaired manually by two operators. After the grading and repair stations the beams are transported through a multi head cross-cut saw, model MK2 where the ends are trimmed before moulding.

After the moulder the beams are once again quality checked and repaired if needed, then labelled and transported to the automated stacking machine, model Opti-Stack 6000.

Flooring Manufacturing

This Opti-Solution is an optimizing cross-cut line consisting of an Opti-Feed 6000 feeding system, that feeds batches of workpieces to a planer. After the planer, the workpieces are automatically transported to a Microtec 502 scanner including x-ray, for detection of defects and quality.

Through a queue control system, the workpieces are then transported to three optimizing cross-cut saws model Opti-Kap 5003, that cuts the workpieces into flooring components. The cross-cut components are then sorted according to the correct lengths, qualities and widths.

Moulding & Millwork Manufacturing

This Opti-Solution is a material handling system consisting of an automatic infeed system model Opti-Feed 6000, that automatically feeds the workpieces to a bandsaw. The bandsaw splits the workpieces into two or three pieces, and the workpieces are subsequently singulated and orientated in the correct order before entering a moulder.

After the moulding process, the workpieces are transported to a double-end tenoner for end profiling, and afterwards automatically bundled in a bundling station. The bundled workpieces are immediately strapped or folioed, and then stacked into big packs by an automatic stacking machine model Opti-Stack 6000. After stacking the full pack is then folioed and strapped

Pallet Manuacturing

This Opti-Solution is a multi head cross-cut line consisting of an automatic infeed system model Opti-Feed 6000, that automatically feeds the workpieces to a feeding chain conveyor.

The feeding chain conveyor creates layers of the workpieces and feed the layers into a multi head cross-cut saw model MK5, for multiple cross-cutting. The cross-cut workpieces are then transported to a continuous stacking machine model Opti-Stack 6000, also capable of placing stabilizing sticks in the packs if needed. After stacking, the packs are automatically separated and transported to a strapping area.

Furniture Manufacturing

This Opti-Solution is an optimizing cross-cut line consisting of an automatic infeed system model Opti-Feed 6000. The infeed system feeds the raw material to a moulding machine, that splits the workpieces into lamellas. After the moulder, the lamellas are automatically singulated and transported to a Microtec Goldeneye 501 scanner, for detection of defects and quality.

Through a queue control system, the workpieces are then transported to two optimizing cross-cut saws model Opti-Kap 5003, that cuts the workpieces into furniture components.

After cross-cutting, the components are sorted for either finger joint components or fixed lengths, stacked manually or automatically by four stacking machines model Opti-Stack 3000.

The post System TM Opti-Solutions appeared first on Stiles Machinery.